Adjusting the right ironing temperature is very important, not only to help the clothes iron better, but also to help protect the surface of the fabric. Refer to this article to know the right ironing temperature for each type of fabric.
Linen, silk, cotton or even wool, jeans… each type of fabric needs to be ironed when ironing needs to choose its own appropriate temperature, combined with smart ironing to smooth wrinkles well without damaging the surface material. fabric. If you regularly use an iron, please refer to the appropriate ironing temperature for each type of fabric.
firstSafe temperature for ironing on different fabrics
Each type will need to choose a separate heat level and ironing method:
– Wool is the most difficult fabric to iron, They need to be left-side up and ironed right through the lining to avoid smudging. The right temperature for ironing wool fabrics is 165 – 190 degrees Celsius.
– With cotton fabric (cotton fabric)can be dry or steam ironed, ironing on the left side is still better for the fabric than ironing on the right side, the temperature is about ironing 180 – 200 degrees Celsius.
– Silk fabric can be ironed straight to the fabric surfaceor lined with a thin silk sheet and steam ironed, using about 140 – 160 degrees Celsius.
– With linen It’s a bit difficult to smooth wrinkles, so choose high temperature to 240 degrees Celsius.
– Acrylic yarn, cotton and nylon fabric iron at moderate heat, about 135 degrees Celsius for best flattening.
The highest temperature is for linen, followed by cotton or cotton, then wool, and below other fabrics. The lowest ironing temperature for synthetic fibers, silk fibers.
2How to identify the fabric of the fabric being ironed?
There are many common fabrics that are easy to identify, but not everyone can distinguish all fabrics.
So if you’re going to iron, but don’t know what fabric you’re using, I advise you to flip the clothing labels to check. They will tell you what fabric the garment is made of, and sometimes even the right temperature for ironing.
3The iron does not indicate the temperature, how to know the heat level to choose?
If the iron you use has a temperature control that has a heat level symbol with a fabric icon, it’s simple, just identify the fabric you’re ironing, and set the iron to that temperature.
If the iron you use only divides the heat by 1, 2, 3 without marking the fabric, follow these instructions:
– Heat level 1: For synthetic fabrics (acrylic, viscose, polyamide, polyester), silk yarn.
– Heat level 2: Used for wool fabrics.
– Heat level 3: For cotton and cotton fabrics.
If you are ironing multiple clothes at once, sort them, and iron the low-heat clothes first.
With this guide, hopefully your clothes will be ironed well, flat and guaranteed to be colorfast and durable.